Centrifugal separator application range:

Applicating in high speed cold heading forming machine, screws forming machine and the essence processing of all the lubricating oil, coolant oil.
 

Characteristics of centrifugal separator:

• Centrifugal separator: high precision oil, the separation of impurities and sludge.

• The highest purificatiom: remove all impurities, effectively removal of sludge, colloid.

• Online purification during the operation of the equipment.

• The use of safety, stable operation, simple operation, low failure rate, long service life.

• No filter, no need consumables, environmental protection and replacement of parts, thereby greatly reducing maintenance costs. To improve the oil quality, greatly prolongs the service life of lubricating oil, oil consumption saving.

• Break the traditional filtering method, clearing machine killer - clay, prolong the machine life, reduce wear and replacement parts, such as the separation of less than 0.6um of impurity, bearings service life can be prolonged by tens of times!

• The huge centrifugal force directly make wearing metal particles with hard and sharp as well as those that can make parts wear or the residual contaminants separated from oil deterioration in oil.

Maintenance of centrifugal separator:

Centrifugal separator equipment maintenance and maintenance simple operation.

• The oil pump motor to stop, wait 1-2 minutes to allow the main rotor stops rotating.

• Loosen the lock, remove the oil of purifier cover, check the sealing piece of oil filter cover

• Remove the inner sleeve, screw loosen inner rotor, open the inner rotor impurity collecting cover.

• Diesel or oil cleaning rotor cover and inner sleeve.

• Check the inner cylinder, such as damaged should be replaced.

• Re install the rotor and O type ring back to the inner ring sleeve nut, and founder of the positioning groove, check the shaft rotation is normal.

• Install cover, start pneumatic pump motor, and check whether there is leakage.

• Motor starting, check if the pump motor is normal.